Programming

Example 1 – Single Tarrif

Make a note of your standing charge and cost per kWh. For example:

Scottish Power
14.8p per kWh
Standing charge £24.80 per quarter (divide by 13 to give the weekly standing charge of £1.91).

Inputting the settings

Insert and remove the meterman card.

Cycle through the settings using the SETTINGS DISPLAY button until you reach STCH/WK £000.00

Press and HOLD the EMERGENCY CREDIT button.

Press and Release the SETTINGS DISPLAY whilst still holding the EMERGENCY CREDIT BUTTON until the correct value is shown.

Release the EMERGENCY CREDIT BUTTON and repeat the process until all the digits are set correctly. Note you need to set the WEEKLY standing charge, found by dividing the quarterly standing charge by 13, in this case £001.91. The resulting display should read STCH/WK £001.91.

Press the SETTINGS DISPLAY button to store the new setting and display the next parameter.

Repeat setting RATE 1 014.80ppu and if your meter has a setting for two rates, then set RATE 2 014.80ppu. On our single rate meters, you will only need to set RATE 1.

Example 2 – Dual Tarrif

Make a note of your standing charge and cost per kWh. For example:

Scottish Power
14.8p per kWh Normal (day) rate.
3.8 per kWh Low (night) rate.
Standing charge £24.80 per quarter (divide by 13 to give the weekly standing charge of £1.91).

Inputting the settings

Insert and remove the meterman card.

Cycle through the settings using the SETTINGS DISPLAY button until you reach STCH/WK £000.00

Press and HOLD the EMERGENCY CREDIT button.

Press and Release the SETTINGS DISPLAY whilst still holding the EMERGENCY CREDIT BUTTON until the correct value is shown.

Release the EMERGENCY CREDIT BUTTON and repeat the process until all the digits are set correctly. Note you need to set the WEEKLY standing charge, found by dividing the quarterly standing charge by 13, in this case £001.91. The resulting display should read STCH/WK £001.91.

Press the SETTINGS DISPLAY button to store the new setting and display the next parameter.

Repeat setting RATE 1 014.80ppu and RATE 2 003.80ppu.

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *